It is now known that cavitation allows excellent results to be obtained especially if applied in the presence of organic material as by demolishing the molecules it reduces both the COD and BOD values.
This happens mainly due to the fact that the physical phenomenon of cavitation enhances, also multiplying exponentially, completely natural physical and chemical processes including oxidation.
While the tests conducted with the EMPOWERING DEVICE on organic-based liquids immediately returned decidedly positive results, with percentage variations on respect to the AS IS sometimes even up to almost 4 figures and obtained in a very short time, those conducted with industrial wastewater required a thoughtful and accurate set-up of the machinery in order to set the best process management dynamics and the related accessories to be applied in order to better complete the process itself.
All this it has become necessary because the tests on non-organic fluids had gone differently from expectations not due to the miss working of the machine but precisely due to its perfect functioning: the parameters of the liquid that were expected should be the first to undergo the action of the EMPOWERING DEVICE, given their inorganic nature, could not actually be treated until other values such as, by way of example, the total suspended solids had not been “normalized”.
On industrial waters EMPOWERING DEVICE does not find its best application in addition to an already existing process but express its maximum when it itself forms the basis for a new, faster and more performing continuous processing process.
In these applications, EMPOWERING DEVICE acts, depending on the case, as a flotator and as a micronizer of the particles, coagulating very small suspended solids, facilitating the following filtration, allowing the clarification of the wastewater and thus making subsequent chemical-physical treatments much easier.
Just as it can best homogenize inhomogeneous wastewater, favoring the subsequent chemical attack through the same reagents also used for traditional industrial purification but consuming only a fraction of the energy required with traditional systems.
The construction geometry of the EMPOWERING DEVICE makes it not only a perfect pressure diffuser, thus reducing energy consumption, but also an excellent mixing system.
A further efficiency can be ensured by the use of subsequent EMPOWERING DEVICE, as with 2 devices in series the liquid can undergo a first treatment at low revolutions, a filtration, an additive while it is treated at a high number of revolutions in the second device for then be further filtered thus obtaining, in most cases, a workflow without downtime.
